DBA 5000 Series T3

New High Performance
2-Piece Discs

SHARING ALL THE TECHNOLOGY THAT DBA® CAN OFFER, WE ARE NOW WITNESSING THE ULTIMATE IN PERFORMANCE DIRECT OE REPLACEMENT DISCS.

This includes a trisymmetrical slot design dampening harmonics, Increasing responsiveness and improving that all important pedal feel’. The 6061—T6 Alumalite hats on the Club Spec 5000 T3 rotors are critical for reducing unsprung weight and rotational mass.

Download PDF Catalogue

Or search part numbers below

5000 T3 Slot Design

Features

  • Patented ’Kangaroo Paw' ventilation design“ provides greater heat dissipation
  • AlumaliteTM centre made from light-weight 6061-T6 aircraft aluminium material (re-useable)
  • X6150 High Carbon Alloyed Iron increases the thermal capacity properties of the rotor
  • Tri-Symmetrical T3 Slot design dampens the vibration harmonics resulting in a quieter, responsive and smoother brake pedal feel
  • TSP (Thermal Stability Profiling) prolongs the service life of the rotor
  • Replacement disc rotors available (without aluminium centre)

At a Glance

  • DAILY DRIVER V4
  • AGGRESSIVE STREET DRIVING
  • COMMERCIAL
  • 4WD I TOWING
  • SHOW CAR
  • PERFORMANCE
  • MOTORSPORT

Alumalite Brake Components

  • Replacement aluminium hats
  • Available in Black or Gold anodised finish
  • Supplied with complete set of NAS nuts/bolts
  • NAS = National Aerospace Standard

 

DBA 5000 Series High Performance 2-Piece Discs

Disc Brakes Australia is proud to announce its New Flat Disc range of products for the high end global performance vehicles. This product typically suits the upper level of prestige performance vehicles that are delivered with factory fitted two-piece rotor designs as standard.

The DBA replacement ring or disc comes with all the outstanding features of the DBA 5000 series products and is available as a direct replacement for vehicles such as the EVO 10, Nissan GTR, Mercedes AMG, HSV and FPV.

DBA, The ultimate brand in performance direct OE replacement discs.

DBA 5000 Series Slot Design

The DBA slotted performance range of rotors, feature many unique and patented designs. DBA® has many slotted design options available and provide a unique design under a conditional special order.

NAS Bolts / Nuts and Adapter

NAS Bolts and Nuts used are light weight and are made to National Aerospace Standards using quality high tensile A286 corrosion resistant alloy and rated to withstand operating temperatures of up to 650°C. These bolts are manufactured for the use of two-piece rotor designs.

DBA® recomends 13 Nm or 9.6 ft lb of torque when tightening the NAS nut and bolt assembly.

The innovative Kangaroo Paw ventilation design runs cooler, is stronger, and outperforms traditional straight vane disc rotors by up to 20%.

The Kangaroo Paw system features 144 precisely positioned diamond and tear—drop pillars. The pillars provide greater strength and greater surface area. This helps by increasing heat dissipation and returning to optimal operating temperatures ready for the next braking application.

T3 Slot design—DBA®'s T3 slot design is built on the T2 design but with an increased number of slots, taking it from 32 to 48 CNC machined slots. The result is an even quieter, more responsive and smoother brake pedal feel. This is achieved from a series of tri-symmetrical 'curved' slots, which when aligned in a specific way, drastically dampen the vibration harmonics, thats commonly associated with traditional straight slot (groove) rotor designs.

The tri—symmetn'cal slots also increase the number of out—gassing exit points for brake pad friction gases to escape through, further increasing the consistency and effectiveness of every brake stop.

Performance metals — Usually only found in high—end performance discs, XG-150 is a unique formulation developed for all DBA® products.

High carbon alloyed iron may look like regular iron found on standard discs, but DBA®’s unique XG—lSO iron formula has been tested the world over to the absolute limits of braking punishment

Built for abuse — DBA® uses a process called thermal stability profiling (TSP) on all 4000 and 5000 discs manufactured with XG-150.

TSP re-aligns the micro-stmcture of the iron, increasing density, resistance to extreme temperature, allowing the rotor to remain dimensionally true.

4000 and 5000 series T3 rotors also incorporate DBA®'s Thermo—Graphic heat paint markings which change colour at speci?c temperature thresholds.

By monitoring the markings, drivers can check their braking performance quickly and easily.

Part Number Diameter Thickness Annulus Air Gap Offset Diameter & No. Of Bolt Holes Vent Design
Part Number Diameter Thickness Annulus Air Gap Offset Diameter & No. Of Bolt Holes Vent Design
v

GENERAL DISCLAIMER

Some information in this Catalogue has been compiled using data published by original equipment manufacturers. Disc Brakes Australia Pty Ltd is unable to warrant the accuracy of third party data, and does not accept responsibility for loss or damage of any kind caused as a result of such data being inaccurate. We recommend you exercise your own skill and care with respect to the selection of goods. However, Disc Brakes Australia Pty Ltd encourages you to contact us if you have any concerns regarding any data/information provided. We will make every effort to correct any errors once they are brought to our attention.

TRADE MARKS

“DBA”, “DISC BRAKES AUSTRALIA”, “4000 series”, “5000 series”, “KANGAROO PAW”, “TSP”, “Thermal Stability Profiling”, “DBA XS”, “XG150”, “T2”, “T3”, “Alumalite” and other associated marks and logos are trade mark and/or registered trade marks of Disc Brakes Australia Pty Ltd. Any unauthorised use of these trade marks by a third party is prohibited. Do not remove this notice.

All “DBA” part references listed in this Catalogue are trade marks of Disc Brakes Australia Pty Ltd. Any unauthorised use of these trade marks by a third party is prohibited. Do not remove this notice.

Any reference to trade marks in the Catalogue owned by third parties such as “Brembo”, “Nissan”, “Porsche” and “Ferrari” are used to merely describe the fit/compatibility of the “DBA” goods. Disc Brakes Australia Pty Ltd makes no representation that we are in any way sponsored by or affiliated with these third parties.

COPYRIGHT NOTICE

Copyright in this Catalogue and in the content of our websites is owned by Disc Brakes Australia Pty Ltd. You may print, distribute and use this Catalogue in unaltered form only, and provided this notice is not removed.

Any queries regarding any of the above should be address to Disc Brakes Australia Pty Ltd at PO Box 6666, Silverwater DC, NSW, 1811, Australia; or by email to info@dba.com.au

THE KANGAROO PAW DESIGN IS NOT AVAILABLE ON ALL PART NUMBERS. ASK YOUR SUPPLIER FOR DETAILS.

© Copyright DBA 2014